Free Help Setting up Your Router or Firewall Set up your router from home
Home Guides Reviews Store Support Forum Requests
see list of routers and firewalls below

Firewalling for the Dlink DSL-504G






 

To configure this router's firewalling properly you should setup a static ip address on your computer. Take a look at our Static IP Address guide to setup a static ip address. When you are finished setting up a static ip address, please come back to this page and enter the ip address you setup in the Static IP Address box below.

Do not skip this step!




Open a web browser like internet explorer or Netscape. Enter the ip address of your router in the address bar of your browser. In the picture above the address bar has http://www.google.com in it. Just replace all of that with the ip address of your router. By default the ip address should be set to 10.1.1.1.




You should see a box prompting you for your username and password. Enter your username and password now. By default both the username and password are admin. Click the Ok button to log in to your router.




Click the Advanced button near the top of the page.




Click the Filters button near the left side of the page.




We will list a series of lines here that will show you exactly how to setup your router's firewall for Defcon. Go ahead and enter the settings shown below into the Filters menu and then click Apply.
Outbound Filter Inbound Filter
 
Source IP ~
Destination IP ~
Source Port ~
Destination Port ~
Protocol
Action

And that is it! You are done!