Free Help Setting up Your Router or Firewall Set up your router from home
Home Guides Reviews Store Support Forum Requests
see list of routers and firewalls below

Firewalling for the Infotecs TermiNet Personal Firewall






 

Before we can open ports for ABC, we need to figure out what ports ABC is using. Here is a brief walkthrough on how to do that. Go ahead and open up ABC.



Click File in the menu at the top of the program. Then click Preferences in the list that drops down.



In the menu on the left hand side of your screen, click the Network link. On this page you should see a Port box. You can change the port number that ABC is using if you like. The number that is in that Port box is the port that you will have to open.

Please enter the number that was in that box below.

ABC's Port for incoming connections

Go ahead and open up Infotecs TermiNet Personal Firewall.


Find the name of your computer in the menu on the left hand side of TermiNet and click it. In the picture above you will see my computer is named RandomAction.


You should now see a new menu that has dropped down under your computer's name. Click the Traffic Rules option in that new menu.

We will list a series of lines here that will show you exactly how to setup Infotecs TermiNet Personal Firewall's firewall for ABC. Go ahead and enter the settings shown below into the Add Rule menu.

You should see a spreadsheet full of empty cells. Right click in there to get a new drop down menu. Click the Add Rule option.
         
     Description:  
     Action:  
     Application:    
     Mode:    
     Protocol:    
         
 
  Single Port   Single Port  
  Port Range   Port Range  
  List of Ports   List of Ports  
  All Ports   All Ports  
       
         
 
 
The setings on the Address and Time tabs of this page should remain set to their default settings. The other settings should be changed to what you see above. Once you have made those changes click the Ok button to save them.