Free Help Setting up Your Router or Firewall Set up your router from home
Home Guides Reviews Store Support Forum Requests
see list of routers and firewalls below

Firewalling for the Infotecs TermiNet Personal Firewall






 
Go ahead and open up Infotecs TermiNet Personal Firewall.


Find the name of your computer in the menu on the left hand side of TermiNet and click it. In the picture above you will see my computer is named RandomAction.


You should now see a new menu that has dropped down under your computer's name. Click the Traffic Rules option in that new menu.

We will list a series of lines here that will show you exactly how to setup Infotecs TermiNet Personal Firewall's firewall for Battlefield 2142. Go ahead and enter the settings shown below into the Add Rule menu.

You should see a spreadsheet full of empty cells. Right click in there to get a new drop down menu. Click the Add Rule option.
         
     Description:  
     Action:  
     Application:    
     Mode:    
     Protocol:    
         
 
  Single Port   Single Port  
  Port Range   Port Range  
  List of Ports   List of Ports  
  All Ports   All Ports  
       
         
 
 
The setings on the Address and Time tabs of this page should remain set to their default settings. The other settings should be changed to what you see above. Once you have made those changes click the Ok button to save them.

You should see another page of settings below that need to be added to Infotecs TermiNet Personal Firewall. Open up a new Add Rule page and enter those settings.

You should see a spreadsheet full of empty cells. Right click in there to get a new drop down menu. Click the Add Rule option.
         
     Description:  
     Action:  
     Application:    
     Mode:    
     Protocol:    
         
 
  Single Port   Single Port  
  Port Range   Port Range  
  List of Ports   List of Ports  
  All Ports   All Ports  
       
         
 
 
The setings on the Address and Time tabs of this page should remain set to their default settings. The other settings should be changed to what you see above. Once you have made those changes click the Ok button to save them.