Free Help Setting up Your Router or Firewall Set up your router from home
Home Guides Reviews Store Support Forum Requests
see list of routers and firewalls below

Prevent traffic from leaving your network with the Level One WBR-3405TX






 



Open a web browser like internet explorer or Netscape. Enter the ip address of your router in the address bar of your browser. In the picture above the address bar has http://www.google.com in it. Just replace all of that with the ip address of your router. By default the ip address should be set to 192.168.1.1.




You should see a box prompting you for your username and password. Enter your username and password now. By default both the username and password are admin. Click the Ok button to log in to your router.




Click the Access button near the left side of the page.




Click the Firewall Rule button near the top of the page.




Put a dot into the Enable radio button. Enter the name of the program into the Name box. It doesn't really matter what you put into this box, but something that will remind you why these ports are being forwarded would be a good idea. Put a dot into the Deny radio button. Select LAN from the Source Interface drop down box. Enter * into the Source IP Range Start and Source IP Range End box. Select WAN from the Destination Interface drop down box. Enter * into the Destination IP Range Start and Destination IP Range End box. Select * from the Protocol drop down box. When you are finished, click the Add button.

And that is it! You are done!