Free Help Setting up Your Router or Firewall Set up your router from home
Home Guides Reviews Store Support Forum Requests
see list of routers and firewalls below

Firewalling for the Microsoft Windows XP Firewall






 

Before we can open ports for 360Share, we need to figure out what port 360Share is using. Here is a brief walkthrough on how to do that. Go ahead and open up 360Share.



Click Tools in the menu at the top of your screen. In the list that drops down click Options.



In the menu at the left hand side of your screen double click the Advanced option. Clicking Advanced, should drop down a couple more options. In this new list of options click the Firewall Config option. Put a dot into the Manual Port open radio button. The port you need to open is in the box to the right of the Manual Port open text. You can change this port if you want to. Just keep in mind that whatever port is in the Manual Port open box, should also be in the Listen On Port box. Then click the Apply button at the bottom of the page.

Please enter the number that was in the Manual Port open box into the box below.

360Share's Port for incoming connections

Go ahead and open up Microsoft Windows XP Firewall. There are a variety of ways that you can get into the Windows XP Firewall. The method that we are going to list should work for most people. Start by clicking on the Start button on the bottom left of your screen and then click on Run. You should see the Run dialog box.


Type the word control into the Run dialog box and click the Ok button. This will take you to the Control Panel.


Click the Security Center link near the bottom left of the page.

Your control panel may look different. If it does, then find the link called Windows Firewall. This will take you straight to the firewall settings page.


Click the Windows Firewall link near the bottom right of the page.




Remove the checkmark from the Don't allow exceptions checkbox.

Click the Exceptions tab.


We will list a series of lines here that will show you exactly how to setup Windows XP Firewall's firewall for 360Share. Go ahead and enter the settings shown below into the Add Port menu.

Click the Add Port button to open up the Add a Port window.
Add A Port
    
Use these settings to open a port through Windows Firewall. To find the port number and protocol, consult the documentation for the program or service you want to use.
       
       
Name  
Port Number  
  UDP  
       
What are the risks of opening a port?
 
Click the Ok button when you have entered all of this data.

You should see another page of settings below that need to be added to Windows XP Firewall. Open up a new Add Port page and enter those settings.

Click the Add Port button to open up the Add a Port window.
Add A Port
    
Use these settings to open a port through Windows Firewall. To find the port number and protocol, consult the documentation for the program or service you want to use.
       
       
Name  
Port Number  
  UDP  
       
What are the risks of opening a port?
 
Click the Ok button when you have entered all of this data. When you are finished, click the Ok button to close the Windows Firewall. You're done!