Most ISPs block the default port that Azureus uses. So it is a good idea to change Azureus' port number to something other than the default port. Here's a brief walkthrough on how to do that.
In Azureus click Tools in the menu at the top of your screen. Then click the Options link in the menu that drops down.
In the menu tree on the left hand side of this window Connection should be selected. Pick a random port between 49152 and 65535. Then enter that port into the Incomming TCP/UDP Listen Port box. When you are done, be sure to click the Save button at the bottom of the configuation screen.
Please enter the port you chose for Azureus below.
Click the Firewall link near the left hand side of the page.
Click the Expert link near the top of the page.
We will list a series of lines here that will show you exactly how to setup Zone Alarm's firewall for Azureus. Go ahead and enter the settings shown below into the Add Rule menu.
You should see another page of settings below that need to be added to Zone Alarm. Open up a new Add Protocol page and enter those settings.
When you are finished, click the Apply button at the bottom of your screen. And that is it! You are done!
