Port Forwarding Warez on the A-Link BR4
Before we can forward ports for Warez, we need to figure out what ports Warez is using. Here is a brief walkthrough on how to do that. Go ahead and open up Warez.
Click Main in the menu at the top of your screen. In the list that drops down click Preferences.
On the left side of this page click on Network. Now we need to what port is in use
for Warez under the option "Listen port". It doesn't really matter what port you choose, but a port between
9000 and 60000 would be a good idea. These higher numbered ports are rarely blocked by ISPs.
Once you have chosen a port (9000 is the default for Warez) please enter that port number into
the box to the right of the Network settings box. That port should also be put into the Listen port box.
I also need to you enter that port number into the box below.
Warez's port for incoming TCP connections
To setup port forwarding on this router your computer needs to have a static ip address.
Try our free PF Setup Static IP Address Program which will setup a static ip address for you.
Or you can take alook at our Static IP Address guide to setup a static ip address.
When you are finished setting up a static ip address, please come back to this page and enter
the ip address you setup in the Static IP Address box below.
Do not skip this step!
Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.
If you do not know your routers internal IP address please read our How To Find Your Routers IP Address guide.
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your router.
By default the IP address should be set to 192.168.10.1.
You should see a box prompting you for your username and password. Enter your username and password now.
By default the username is admin, and the password is 1234. Click the Ok button to log in to your router.
Please visit our Default Router Passwords page if the username and password shown above did not work for you.
Click the NAT link near the top of the page.
The menu on the left should change. In this new menu, click Port Mapping.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Warez requires you to forward the following ports: 100000. Go ahead and enter the settings shown above into the Port Mapping menu.
| Server IP | Mapping Ports | Type | Comment | Enabled | |
| 1. | 192.168.10. |
When you're finished, click OK near the bottom of the screen to save your changes.
And that's it! You're done!
To test if your port has been properly forwarded, you can use our Port Checker tool.
Didn't find the screenshot you were looking for? Check our our giant collection of router screenshots.
