Port Forwarding the A-Link RR84AP Router for QSee QSD6204


What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View A-Link RR84AP Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > A-Link > RR84AP > QSee QSD6204

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the A-Link RR84AP router your computer needs to have a static IP address. You should complete one of the following steps first:


Now that you have setup a Static IP Address on your computer, please enter the IP address that you assigned to your computer here:

Don't Skip This Step!

Login to the A-Link RR84AP Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your A-Link RR84AP Router IP Address

It's ok if you don't know your A-Link RR84AP router's internal IP address. You can find it by doing one of the following:

Login To The A-Link RR84AP Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

A-Link RR84AP Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your A-Link RR84AP router. By default the IP address should be set to 10.0.0.1.

A-Link RR84AP Screenshot 1

We do not currently know the default username and password for your router. If you know them, please use our Comments page to let us know what they are. Thanks!

Please visit our Default Router Passwords page if the username and password shown above do not work for you.

How to Port Forward QSee QSD6204 on the A-Link RR84AP


Having trouble forwarding ports on the A-Link RR84AP?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your A-Link RR84AP router to save you time and hassle.

Before we can forward ports to your DVR, we need to change some settings in your DVR. Press Menu on your remote control to get in to your DVR's main menu.

In main menu, press the up or down arrow until the Network Setup menu is selected. Then the SEL button to enter the Network Setup menu.

Write down the number that is in the IP, Gateway, and Subnet Mask settings. Do not change the Gateway and Subnet Mask settings. Change the IP Allocation setting to Static. You may have to reenter the Gateway and Subnet after you change the IP Allocation setting to Static. We are going to create static ip address for your DVR and use it from now on. The IP address in the picture above is 192.168.1.100. The 100 portion of that ip address is called the last octet. Each octet of an ip address ranges from 1 to 254. If you have an ip address where the last octet is closer to 1 than 254, add 50 to the last octet and set the IP ADDR to that. If you have an ip address that is closer to 254 than 1, subtract 50 from that last octet and set the IP ADDR to that. Save the settings and get out of your DVR's setup. In this example the last octet was 100. So the new octet in this example would be 150, and the ip address in this example would be 192.168.1.150. Do not use those values they are just an example.

You will need to restart your DVR before those settings will take effect.

Remember what you set the IP ADDR to. You will need to tell your router what IP Address to forward those ports to. Since you want to forward ports to your DVR you will need your DVR's IP address.

We've already taken care of setting up the static ip address in the guide below so you don't need to worry about that part. Just enter your DVR's static ip address that we just setup in to the box requesting your computer's ip address bellow. You won't really be forwarding ports to your computer, but you will be forwarding them to your DVR. Everything else is the same, just keep in mind that the ports will end up being forwarded to your DVR and not your computer.

A-Link RR84AP Router Port Forwarding Screenshots

Now that you are logged in to your A-Link RR84AP router you should see the following:

A-Link RR84AP Screenshot 2

Click the Advance button near the top of the page.

A-Link RR84AP Screenshot 3

Click the Firewall button near the top of the page.

You should now see a new menu. In this new menu, click Port Forwarding.

A-Link RR84AP Screenshot 4

Forward Ports 80 on the A-Link RR84AP

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. QSee QSD6204 requires you to forward the 80 ports. Go ahead and enter the settings shown above into the Port Forwarding menu and then click Add.

Enable:
Name:
IP Address:
TCP Port:
UDP Port:

And that is it! You are done!


Test if Your Ports are Open

Now that you have forwarded ports for QSee QSD6204 on the A-Link RR84AP you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

A-Link RR84AP Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our A-Link RR84AP Router Screenshots. We have the Internets largest collection of Router Screenshots.