Free Help Setting up Your Router or Firewall Set up your router from home
Home Guides Reviews Store Support Forum Requests
see list of routers and firewalls below

Port Forwarding for the ACorp HU5D


What is Port Forwarding?
What is Port Triggering?




 

Please enter the ip address of your BT Homesafe into the box below.

Do not skip this step!




Open a web browser like internet explorer or Netscape. Enter the ip address of your router in the address bar of your browser. In the picture above the address bar has http://www.google.com in it. Just replace all of that with the ip address of your router. By default the ip address should be set to 192.168.1.1.




Click the NAT link near the center of the page.




There should be a dot in the SUA Only setting. If this isn't the case, you can not setup port forwarding without making a major change to your network. I wouldn't advise changing this unless you know what you are doing. Alright, if there is a dot in the SUA Only setting, go ahead and click Edit Details.


  Start Port No. End Port No. IP Address
1

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. BT Homesafe requires you to forward the 80 ports. Go ahead and enter the settings shown above into the Edit SUA/NAT Server Set menu.

When you're finished, click Save near the bottom of the screen to save your changes.

And that's it! You're done!