BarracudaDrive uses port 80 TCP and port 443 TCP by default, and those are the ports we will configure here. If for whatever reason those ports are not availble, BarracudaDrive will try use to 8080-8100 TCP. For more information about BarracudaDrive, please visit barracudaserver.com

To setup port forwarding on this router your computer needs to have a static ip address. Take a look at our Static IP Address guide to setup a static ip address. When you are finished setting up a static ip address, please come back to this page and enter the ip address you setup in the Static IP Address box below.

Open a web browser like internet explorer or Netscape. Enter the ip address of your router in the address bar of your browser. In the picture above the address bar has http://www.google.com in it. Just replace all of that with the ip address of your router. By default the ip address should be set to 192.168.10.100.

You should see a box prompting you for your password. Enter your password now. By default your password is admin. Click the Ok button to log in to your router.

Click the Forwarding Rules link near the left side of the page.

You should now see a new menu. In this new menu, click Virtual Server.

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. BarracudaDrive requires you to forward the 80,443 ports. Go ahead and enter the settings shown above into the Virtual Server menu.

When you're finished, click Save near the bottom of the screen to save your changes.

And that's it! You're done!