Free Help Setting up Your Router or Firewall Set up your router from home
Home Guides Reviews Store Support Forum Requests
see list of routers and firewalls below

Port Forwarding for the AboveCable AirCon 1100


What is Port Forwarding?
What is Port Triggering?




 

To setup port forwarding on this router your computer needs to have a static ip address. Take a look at our Static IP Address guide to setup a static ip address. When you are finished setting up a static ip address, please come back to this page and enter the ip address you setup in the Static IP Address box below.

Do not skip this step!

Please enter the static ip you want to forward to:

192.168.100.




Open a web browser like internet explorer or Netscape. Enter the ip address of your router in the address bar of your browser. In the picture above the address bar has http://www.google.com in it. Just replace all of that with the ip address of your router. By default the ip address should be set to 192.168.10.100.




You should see a box prompting you for your password. Enter your password now. By default your password is admin. Click the Ok button to log in to your router.




Click the Forwarding Rules link near the left side of the page.

You should now see a new menu. In this new menu, click Virtual Server.




Enter the ports to forward into the Service Ports box. These ports can be entered as a list 23,24,25, a range 500-600, or a combination of both 23,45,500-600. Enter the ip address to forward these ports to into the Server IP box. If you are forwarding ports so you can run a program on your computer, you should enter your computer's ip address into that box. Put a checkmark in the Enable checkbox.

When you're finished, click Save near the bottom of the screen to save your changes.

And that's it! You're done!