Port Forwarding QSee QSDR44DRTC on the Accton CheetahAccess

What is Port Forwarding?

View all Router Screenshots.

Home > Routers > Accton > CheetahAccess > QSee QSDR44DRTC

Configuring the DVR to pick up an IP address

  • Press Menu
  • Select Network
  • Make sure Type is set to DHCP

  • Select Apply
  • Select Exit
The DVR will reboot & pick up an ip address from the router.


Identifying the IP address

  • Press Menu
  • Select Network
  • Write down the ip address, subnet mask & gateway.


Assign a Static IP

  • Change Type to Static
  • Input the same ip address, subnet mask & gateway - (you wrote down earlier).

  • Select Apply
  • Select Exit
Now you have completed the ip configuration for the dvr.
Move on to the port forwarding section . in you router.

To setup port forwarding on this router your computer needs to have a static ip address.
Try our free PF Setup Static IP Address Program which will setup a static ip address for you.

Or you can take alook at our Static IP Address guide to setup a static ip address. When you are finished setting up a static ip address, please come back to this page and enter the ip address you setup in the Static IP Address box below.

Do not skip this step!

192.168.2.
CheetahAccess

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser. If you do not know your routers internal IP address please read our How To Find Your Routers IP Address guide.

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your router. By default the IP address should be set to 192.168.2.1.

CheetahAccess

You should see a box prompting you for your password. Enter your password now. By default your password is blank. Click the Login button to log in to your router.

Please visit our Default Router Passwords page if the username and password shown above do not work for you.

CheetahAccess

Click the Setup link near the top of the page.

The menu on the left should change. In this new menu, click Virtual Server.

CheetahAccess


Entry #1

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. QSee QSDR44DRTC requires you to forward the following ports: 80,9000. Go ahead and enter the settings shown above into the Virtual Server menu.

  Private IP Private Port Type Public Port
1 192.168.2. TCP UDP



Entry #2

You should see another page of settings that need to be entered into one of the blank lines on your routers Virtual Server page. Go ahead and enter those settings now.

  Private IP Private Port Type Public Port
2 192.168.2. TCP UDP

When you're finished, click Enter near the bottom of the screen to save your changes.

And that's it! You're done!


To test if your port has been properly forwarded, you can use our Port Checker tool.

Didn't find the screenshot you were looking for? Check our our giant collection of router screenshots.