Free Port Forwarding Guides & PFConfig: Forward Your Ports Automatically
Port Forwarding Azureus on the Actiontec 1020
Most ISPs block the default port that Azureus uses. So it is a good idea to change Azureus' port number to something other than the default port. Here's a brief walkthrough on how to do that.
In Azureus click Tools in the menu at the top of your screen. Then click the Options link in the menu that drops down.
In the menu tree on the left hand side of this window Connection should be selected. Pick a random port between 49152 and 65535. Then enter that port into the Incomming TCP/UDP Listen Port box. When you are done, be sure to click the Save button at the bottom of the configuation screen.
Please enter the port you chose for Azureus below.
Azureus' Port
To setup port forwarding on this router your computer needs to have a static ip address.
Try our free PF Setup Static IP Address Program which will setup a static ip address for your computer.
Or you can take a look at our Static IP Address guide to setup a static ip address.
When you are finished setting up a static ip address, please come back to this page and enter
the ip address you setup in the Static IP Address box below.
Do not skip this step!
Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.
If you do not know your routers internal IP address please read our How To Find Your Routers IP Address guide.
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your router.
By default the IP address should be set to 192.168.0.1.
Click the Setup / Configuration link.
Click the Advanced Setup link near the left of the page.
Click the Begin Advanced Setup button.
Click the Port Forward link near the left of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Azureus requires you to forward the ports you entered above. Go ahead and enter the settings shown above into the Port Forwarding menu and then click Add.
| IP Port Range | Protocol | IP Address |
| to | ||
You should see another page of settings that need to be entered into one of the blank lines on your routers Port Forwarding page. Go ahead and enter those settings and then click Add.
| IP Port Range | Protocol | IP Address |
| to | ||
You should see another page of settings that need to be entered into one of the blank lines on your routers Port Forwarding page. Go ahead and enter those settings and then click Add.
| IP Port Range | Protocol | IP Address |
| to | ||
When you're finished, click Save and Restart near the left of the screen to save your changes.
And that's it! You're done!
To test if your port has been properly forwarded, you can use our Port Checker tool.
Didn't find the screenshot you were looking for? Check our our giant collection of router screenshots.