Before we can forward ports for Ares, we need to figure out what ports ares is using. Here is a brief walkthrough on how to do that.

Open up Ares. Then click the Control Panel icon in the toolbar at the top of your screen.

You should see a bunch of tabs close to the top of this window. One of these tabs should be labeled Transfer. Go ahead and click it now.

Enter the port you want Ares to use into the Accept incoming connections on port box. By default this port is set to 1157. You can change it to whatever you like, or leave it set to 1157.

Please enter the port you chose for Ares below.

To setup port forwarding on this router your computer needs to have a static ip address. Take a look at our Static IP Address guide to setup a static ip address. When you are finished setting up a static ip address, please come back to this page and enter the ip address you setup in the Static IP Address box below.

Open a web browser like internet explorer or Netscape. Enter the ip address of your router in the address bar of your browser. In the picture above the address bar has http://www.google.com in it. Just replace all of that with the ip address of your router. By default the ip address should be set to 192.168.0.1.

Click the Advanced Setup link near the left side of the page.

Click the Port Forward link near the left side of the page.

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Ares requires you to forward the ports you entered above. Go ahead and enter the settings shown above into the Port Forwarding menu and then click Add.

When you're finished, click Save and Restart near the left side of the screen to save your changes.

And that's it! You're done!