Port Forwarding the Actiontec GT701WG Router for NetFone

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Actiontec Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Actiontec > GT701WG > NetFone

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Actiontec GT701WG router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:

Don't Skip This Step!

Login to the Actiontec GT701WG Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Actiontec GT701WG Router IP Address

It's ok if you don't know your Actiontec GT701WG router's internal IP address. You can find it by doing one of the following:

Login To The Actiontec GT701WG Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Actiontec GT701WG Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Actiontec GT701WG router. By default the IP address should be set to

How to Port Forward NetFone on the Actiontec GT701WG

Having trouble forwarding ports on the Actiontec GT701WG?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.

Actiontec GT701WG Router Port Forwarding Screenshots

Now that you are logged in to your Actiontec GT701WG router you should see the following:

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Actiontec GT701WG Router Username is: admin

The Default Actiontec GT701WG Router Password is: blank

Click the button to log in to your Actiontec GT701WG router.

Default Usernames and Passwords for other Actiontec Routers

Please visit our Default Actiontec Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Actiontec GT701WG router username and password, use our How to Reset a Router Password guide to set your Actiontec GT701WG router back to its factory settings.

Actiontec GT701WG Screenshot 1

Click the Setup / Configuration link.

Actiontec GT701WG Screenshot 2

Click the Advanced Setup link near the left of the page.

Actiontec GT701WG Screenshot 3

Click the Begin Advanced Setup button.

Actiontec GT701WG Screenshot 4

Click the Port Forward link near the left of the page.

Actiontec GT701WG Screenshot 5

Forward Ports 10200 on the Actiontec GT701WG

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. NetFone requires you to forward the 10200 ports. Go ahead and enter the settings shown above into the Port Forwarding menu and then click Add.

IP Port Range Protocol IP Address

When you're finished, click Save and Restart near the left of the screen to save your changes.

And that's it! You're done!

Test if Your Ports are Open

Now that you have forwarded ports for NetFone on the Actiontec GT701WG you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Actiontec GT701WG Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Actiontec Router Screenshots. We have the Internets largest collection of Router Screenshots.