Port Forwarding Championship Manager 03-04 on the Actiontec GT704-WG
Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.
If you do not know your routers internal IP address please read our How To Find Your Routers IP Address guide.
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your router.
By default the IP address should be set to 192.168.0.1.
Click the Setup / Configuration link.
Click the Advanced Setup link near the left of the page.
Click the Begin Advanced Setup button.
Click the Application Level Gateway link near the left of the page.
Put a dot into the User radio button.
Click the New button.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Championship Manager 03-04 requires you to forward the 9093-9094 ports. Go ahead and enter the settings shown above into the Rule Management menu and then click Apply.
| Rule Name | |||
| Protocol | |||
| Port Start | Port End | ||
| Port Map |
You should see another page of settings that need to be entered into one of the blank lines on your routers Rule Management page. Go ahead and enter those settings and then click Apply.
| Rule Name | |||
| Protocol | |||
| Port Start | Port End | ||
| Port Map |
When you are finished, click the Back button.
Use the LAN Device box to choose a computer to forward ports to. This box contains a list of computer names that are visible on your network.
Select the applications you just created in the Available Rules list, then click the Add>> button to move them to the Applied Rule box.
When you're finished, click Save and Restart near the left of the screen to save your changes.
And that's it! You're done!
To test if your port has been properly forwarded, you can use our Port Checker tool.
Didn't find the screenshot you were looking for? Check our our giant collection of router screenshots.
