Port Forwarding the Actiontec GT704-WG Router for QSee QSU2DVR04


What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Actiontec Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Actiontec > GT704-WG > QSee QSU2DVR04

Login to the Actiontec GT704-WG Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Actiontec GT704-WG Router IP Address

It's ok if you don't know your Actiontec GT704-WG router's internal IP address. You can find it by doing one of the following:

Login To The Actiontec GT704-WG Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Actiontec GT704-WG Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Actiontec GT704-WG router. By default the IP address should be set to 192.168.0.1.

How to Port Forward QSee QSU2DVR04 on the Actiontec GT704-WG


Having trouble forwarding ports on the Actiontec GT704-WG?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Actiontec GT704-WG router to save you time and hassle.

Before we can forward ports to your DVR, we need to change some settings in your DVR.

Open the SuperDvr program. Click the lock on the right side of the window to log in. By default the username is system and the password is blank. That might mean that you enter nothing for the password, or you might actually have to type blank.

Click the wrench tool on the right hand side of the screen to get in to the configuration menu.

The red box in the screenshot above circles the ports that must be forwarded to your computer's ip address.

Actiontec GT704-WG Router Port Forwarding Screenshots

Now that you are logged in to your Actiontec GT704-WG router you should see the following:

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Actiontec GT704-WG Router Username is: admin

The Default Actiontec GT704-WG Router Password is: blank


Click the button to log in to your Actiontec GT704-WG router.


Default Usernames and Passwords for other Actiontec Routers

Please visit our Default Actiontec Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Actiontec GT704-WG router username and password, use our How to Reset a Router Password guide to set your Actiontec GT704-WG router back to its factory settings.


Actiontec GT704-WG Screenshot 1

Click the Setup / Configuration link.

Actiontec GT704-WG Screenshot 3

Click the Advanced Setup link near the left of the page.

Actiontec GT704-WG Screenshot 4

Click the Begin Advanced Setup button.

Actiontec GT704-WG Screenshot 5

Click the Application Level Gateway link near the left of the page.

Actiontec GT704-WG Screenshot 6

Put a dot into the User radio button.

Click the New button.

Actiontec GT704-WG Screenshot 7

Forward Ports 80 on the Actiontec GT704-WG

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. QSee QSU2DVR04 requires you to forward the 80,1159-1161 ports. Go ahead and enter the settings shown above into the Rule Management menu and then click Apply.

Rule Name    
Protocol    
Port Start Port End
Port Map    


Forward Ports 1159-1161 on the Actiontec GT704-WG

You should see another page of settings that need to be entered into one of the blank lines on your routers Rule Management page. Go ahead and enter those settings and then click Apply.

Rule Name    
Protocol    
Port Start Port End
Port Map    


Forward Ports 80 on the Actiontec GT704-WG

You should see another page of settings that need to be entered into one of the blank lines on your routers Rule Management page. Go ahead and enter those settings and then click Apply.

Rule Name    
Protocol    
Port Start Port End
Port Map    


Forward Ports 1159-1161 on the Actiontec GT704-WG

You should see another page of settings that need to be entered into one of the blank lines on your routers Rule Management page. Go ahead and enter those settings and then click Apply.

Rule Name    
Protocol    
Port Start Port End
Port Map    

When you are finished, click the Back button.

Actiontec GT704-WG Screenshot 6

Use the LAN Device box to choose a computer to forward ports to. This box contains a list of computer names that are visible on your network.

Select the applications you just created in the Available Rules list, then click the Add>> button to move them to the Applied Rule box.

When you're finished, click Save and Restart near the left of the screen to save your changes.

And that's it! You're done!


Test if Your Ports are Open

Now that you have forwarded ports for QSee QSU2DVR04 on the Actiontec GT704-WG you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Actiontec GT704-WG Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Actiontec Router Screenshots. We have the Internets largest collection of Router Screenshots.