Free Help Setting up Your Router or Firewall Set up your router from home
Home Guides Reviews Store Support Forum Requests
see list of routers and firewalls below

Port Forwarding for the Actiontec GT704-WG


What is Port Forwarding?
What is Port Triggering?




 

To setup port forwarding on this router your computer needs to have a static ip address. Take a look at our Static IP Address guide to setup a static ip address. When you are finished setting up a static ip address, please come back to this page and enter the ip address you setup in the Static IP Address box below.

Do not skip this step!




Open a web browser like internet explorer or Netscape. Enter the ip address of your router in the address bar of your browser. In the picture above the address bar has http://www.google.com in it. Just replace all of that with the ip address of your router. By default the ip address should be set to 192.168.1.1.




You should see a box prompting you for your username and password. Enter your username and password now. By default the username is admin, and the password is password. Click the Ok button to log in to your router.




Click the Security button near the top of the page.




Click the Applications link near the left hand side of the page.




Put a dot into the User radio button.

Click the New button near the bottom of the page.




Rule Name    
Protocol    
Port Start Port End
Port Map    

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Asherons Call requires you to forward the 9000-9001,9004-9005,9012-9013 ports. Go ahead and enter the settings shown above into the Rule Management menu and then click Apply.

Rule Name    
Protocol    
Port Start Port End
Port Map    

You should see another page of settings that need to be entered into one of the blank lines on your routers Rule Management page. Go ahead and enter those settings and then click Apply.

Rule Name    
Protocol    
Port Start Port End
Port Map    

You should see another page of settings that need to be entered into one of the blank lines on your routers Rule Management page. Go ahead and enter those settings and then click Apply.




Use the PC Name box to choose a computer to forward ports to. This box contains a list of computer names that are visible on your network. Select the applications you just created in the Available Rules list, then click the Add > button to move them to the Applied Rules box. When you are finished, click the Apply button.