Free Help Setting up Your Router or Firewall Set up your router from home
Home Guides Reviews Store Support Forum Requests
see list of routers and firewalls below

Port Forwarding for the Actiontec M1000


What is Port Forwarding?
What is Port Triggering?




 

Most ISPs block the default port that Azureus uses. So it is a good idea to change Azureus' port number to something other than the default port. Here's a brief walkthrough on how to do that.



In Azureus click Tools in the menu at the top of your screen. Then click the Options link in the menu that drops down.



In the menu tree on the left hand side of this window Connection should be selected. Pick a random port between 49152 and 65535. Then enter that port into the Incomming TCP/UDP Listen Port box. When you are done, be sure to click the Save button at the bottom of the configuation screen.

Please enter the port you chose for Azureus below.

Azureus' Port

To setup port forwarding on this router your computer needs to have a static ip address. Take a look at our Static IP Address guide to setup a static ip address. When you are finished setting up a static ip address, please come back to this page and enter the ip address you setup in the Static IP Address box below.

Do not skip this step!




Open a web browser like internet explorer or Netscape. Enter the ip address of your router in the address bar of your browser. In the picture above the address bar has http://www.google.com in it. Just replace all of that with the ip address of your router. By default the ip address should be set to 192.168.0.1.




I do not know the default username and password for your router. If you know them, please use our Comments page to let us know what they are. Thanks!




Click the Advanced Setup button near the top of the page.




Click the Applications link near the left hand side of the page.




Put a dot into the User radio button.

Click the New button near the bottom of the page.




Rule Name    
Protocol    
Port Start Port End
Port Map    

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Azureus requires you to forward the ports you entered above. Go ahead and enter the settings shown above into the Rule Management menu and then click Apply.

Rule Name    
Protocol    
Port Start Port End
Port Map    

You should see another page of settings that need to be entered into one of the blank lines on your routers Rule Management page. Go ahead and enter those settings and then click Apply.

Rule Name    
Protocol    
Port Start Port End
Port Map    

You should see another page of settings that need to be entered into one of the blank lines on your routers Rule Management page. Go ahead and enter those settings and then click Apply.




Use the Lan Device box to choose a computer to forward ports to. This box contains a list of computer names that are visible on your network. Select the applications you just created in the Available Rules list, then click the Add >> button to move them to the Applied Rules box. When you are finished, click the Apply button.