Port Forwarding the Actiontec R1000H Router for QSee QR404-403-3

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Actiontec R1000H Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Actiontec > R1000H > QSee QR404-403-3

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Actiontec R1000H router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:

Don't Skip This Step!

Login to the Actiontec R1000H Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Actiontec R1000H Router IP Address

It's ok if you don't know your Actiontec R1000H router's internal IP address. You can find it by doing one of the following:

Login To The Actiontec R1000H Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Actiontec R1000H Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Actiontec R1000H router. By default the IP address should be set to

Actiontec R1000H Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Actiontec R1000H Router Username is: admin

The Default Actiontec R1000H Router Password is: admin

Click the Apply button to log in to your Actiontec R1000H router.

Default Usernames and Passwords for other Actiontec Routers

Please visit our Default Actiontec Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Actiontec R1000H router username and password, use our How to Reset a Router Password guide to set your Actiontec R1000H router back to its factory settings.

How to Port Forward QSee QR404-403-3 on the Actiontec R1000H

Having trouble forwarding ports on the Actiontec R1000H?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.

Configuring the DVR to pick up an IP address

  • Press Menu
  • Select Network
  • Make sure Type is set to DHCP

  • Select Apply
  • Select Exit
The DVR will reboot & pick up an ip address from the router.

Identifying the IP address

  • Press Menu
  • Select Network
  • Write down the ip address, subnet mask & gateway.

Assign a Static IP

  • Change Type to Static
  • Input the same ip address, subnet mask & gateway - (you wrote down earlier).

  • Select Apply
  • Select Exit
Now you have completed the ip configuration for the dvr.
Move on to the port forwarding section . in you router.

Actiontec R1000H Router Port Forwarding Screenshots

Now that you are logged in to your Actiontec R1000H router you should see the following:

Actiontec R1000H Screenshot 2

Click the Advanced Setup button near the top of the page.

Actiontec R1000H Screenshot 3

Click the Port Forwarding link near the left of the page.

Actiontec R1000H Screenshot 4

Forward Ports 80 on the Actiontec R1000H

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. QSee QR404-403-3 requires you to forward the TCP(80,9000) ports. Go ahead and enter the settings shown above into the Port Forwarding menu and then click Apply.

Starting Port:  
Ending Port:  
LAN IP Address:  

Forward Ports 9000 on the Actiontec R1000H

You should see another page of settings that need to be entered into one of the blank lines on your routers Port Forwarding page. Go ahead and enter those settings and then click Apply.

Starting Port:  
Ending Port:  
LAN IP Address:  

And that is it! You are done!

Test if Your Ports are Open

Now that you have forwarded ports for QSee QR404-403-3 on the Actiontec R1000H you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Actiontec R1000H Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Actiontec R1000H Router Screenshots. We have the Internets largest collection of Router Screenshots.