To setup port forwarding on this router your computer needs to have a static ip address. Take a look at our Static IP Address guide to setup a static ip address. When you are finished setting up a static ip address, please come back to this page and enter the ip address you setup in the Static IP Address box below.

Open a web browser like internet explorer or Netscape. Enter the ip address of your router in the address bar of your browser. In the picture above the address bar has http://www.google.com in it. Just replace all of that with the ip address of your router. By default the ip address should be set to 192.168.0.1.

Click the Advanced Setup link near the left side of the page.

Click the Port Forward link near the left side of the page.

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Apprentice requires you to forward the 4747 ports. Go ahead and enter the settings shown above into the Port Forwarding menu and then click Add.

When you're finished, click Save and Restart near the left side of the screen to save your changes.

And that's it! You're done!