Port Forwarding SababaDC on the Actiontec R1524SU-1
Before we can forward ports for SababaDC, we need to figure out what ports SababaDC is using. Here is a brief walkthrough on how to do that. Go ahead and open up SababaDC.
Click the File button in the menu at the top of your screen. In the menu that drops down click Settings.
In the menu on the left hand side of this page click the Connection Settings link. You should see a TCP Port box and an UDP Port box. Enter a random port into each of these boxes. It doesn't matter what ports you choose, but a port numbers between 10000 and 60000 would be a good idea. A higher numbered port is generally the best to use, because most ISP's do not block the higher numbered ports. Please enter the port you chose for the TCP Port box into the box below.
SababaDC's port for incoming TCP connections
Please enter the port you chose for the UDP Port box into the box below.
SababaDC's port for incoming UDP connections
To setup port forwarding on this router your computer needs to have a static ip address.
Try our free PF Setup Static IP Address Program which will setup a static ip address for your computer.
Or you can take a look at our Static IP Address guide to setup a static ip address.
When you are finished setting up a static ip address, please come back to this page and enter
the ip address you setup in the Static IP Address box below.
Do not skip this step!
Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.
If you do not know your routers internal IP address please read our How To Find Your Routers IP Address guide.
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your router.
By default the IP address should be set to 192.168.0.1.
Click the Setup / Configuration link.
Click the Advanced Setup link near the left of the page.
Click the Begin Advanced Setup button.
Click the Port Forward link near the left of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. SababaDC requires you to forward the ports you entered above. Go ahead and enter the settings shown above into the Port Forwarding menu and then click Add.
| IP Port Range | Protocol | IP Address |
| to | ||
You should see another page of settings that need to be entered into one of the blank lines on your routers Port Forwarding page. Go ahead and enter those settings and then click Add.
| IP Port Range | Protocol | IP Address |
| to | ||
When you're finished, click Save and Restart near the left of the screen to save your changes.
And that's it! You're done!
To test if your port has been properly forwarded, you can use our Port Checker tool.
Didn't find the screenshot you were looking for? Check our our giant collection of router screenshots.
