Before we can forward ports for BCDC++, we need to figure out what ports BCDC++ is using. Here is a brief walkthrough on how to do that. Go ahead and open up BCDC++.

In the menu at the top of your screen click the file option. In the menu that drops down click the Settings link.

In the menu on the left hand side of the window that popped up click the Connection Settings link. You should see a TCP box and an UDP box. Enter a random port into each of these boxes. It doesn't matter what ports you choose, but a port numbers between 10000 and 60000 would be a good idea. A higher numbered port is generally the best to use, because most ISP's do not block the higher numbered ports. Please enter the port you chose for the TCP box into the box below.

To setup port forwarding on this router your computer needs to have a static ip address. Take a look at our Static IP Address guide to setup a static ip address. When you are finished setting up a static ip address, please come back to this page and enter the ip address you setup in the Static IP Address box below.

Open a web browser like internet explorer or Netscape. Enter the ip address of your router in the address bar of your browser. In the picture above the address bar has http://www.google.com in it. Just replace all of that with the ip address of your router. By default the ip address should be set to 192.168.8.1.

You should see a box prompting you for your username and password. Enter your username and password now. By default the username is admin, and the password is blank. Click the Login button to log in to your router.

Click the Virtual Server link near the left side of the page.

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. BCDC++ requires you to forward the ports you entered above. Go ahead and enter the settings shown above into the Virtual Server menu.

You should see another page of settings that need to be entered into one of the blank lines on your routers Virtual Server page. Go ahead and enter those settings now.

When you're finished, click Save & Restart near the bottom of the screen to save your changes.

And that's it! You're done!