Before we can forward ports for 360Share, we need to figure out what port 360Share is using. Here is a brief walkthrough on how to do that. Go ahead and open up 360Share.

Click Tools in the menu at the top of your screen. In the list that drops down click Options.

In the menu at the left hand side of your screen double click the Advanced option. Clicking Advanced, should drop down a couple more options. In this new list of options click the Firewall Config option. Put a dot into the Manual Port Forward radio button. The port you need to forward is in the box to the right of the Manual Port Forward text. You can change this port if you want to. Just keep in mind that whatever port is in the Manual Port Forward box, should also be in the Listen On Port box. Then click the Apply button at the bottom of the page.

Please enter the number that was in the Manual Port Forward box into the box below.

To setup port forwarding on this router your computer needs to have a static ip address. Take a look at our Static IP Address guide to setup a static ip address. When you are finished setting up a static ip address, please come back to this page and enter the ip address you setup in the Static IP Address box below.

Open a web browser like internet explorer or Netscape. Enter the ip address of your router in the address bar of your browser. In the picture above the address bar has http://www.google.com in it. Just replace all of that with the ip address of your router. By default the ip address should be set to http://10.0.0.1:53920/goform/HomePage.

You should see a box prompting you for your username and password. Enter your username and password now. By default the username is anything, and the password is blank. Click the Ok button to log in to your router.

Click the NAPT link near the left side of the page.

Click the List of Proxy link near the top of the page.

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. 360Share requires you to forward the ports you entered above. Go ahead and enter the settings shown above into the List of Proxy menu and then click the top Add button.

You should see another page of settings that need to be entered into one of the blank lines on your routers List of Proxy page. Go ahead and enter those settings and then click the top Add button.

And that is it! You are done!