Port Forwarding Warez on the Aethra Starvoice IADSV1042
Before we can forward ports for Warez, we need to figure out what ports Warez is using. Here is a brief walkthrough on how to do that. Go ahead and open up Warez.
Click Main in the menu at the top of your screen. In the list that drops down click Preferences.
On the left side of this page click on Network. Now we need to what port is in use
for Warez under the option "Listen port". It doesn't really matter what port you choose, but a port between
9000 and 60000 would be a good idea. These higher numbered ports are rarely blocked by ISPs.
Once you have chosen a port (9000 is the default for Warez) please enter that port number into
the box to the right of the Network settings box. That port should also be put into the Listen port box.
I also need to you enter that port number into the box below.
Warez's port for incoming TCP connections
To setup port forwarding on this router your computer needs to have a static ip address.
Try our free PF Setup Static IP Address Program which will setup a static ip address for your computer.
Or you can take a look at our Static IP Address guide to setup a static ip address.
When you are finished setting up a static ip address, please come back to this page and enter
the ip address you setup in the Static IP Address box below.
Do not skip this step!
Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.
If you do not know your routers internal IP address please read our How To Find Your Routers IP Address guide.
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your router.
By default the IP address should be set to http://10.0.0.1:53920/goform/HomePage.
You should see a box prompting you for your username and password. Enter your username and password now.
By default the username is anything, and the password is blank. Click the Ok button to log in to your router.
Please visit our Default Router Passwords page if the username and password shown above did not work for you.
Click the NAPT link near the left of the page.
Click the List of Proxy link near the top of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Warez requires you to forward the ports you entered above. Go ahead and enter the settings shown above into the List of Proxy menu and then click Add.
| Protocol: | Public Port: | Private Port: | Port Range: | Private IP Address: | |
You should see another page of settings that need to be entered into one of the blank lines on your routers List of Proxy page. Go ahead and enter those settings and then click Add.
| Protocol: | Public Port: | Private Port: | Port Range: | Private IP Address: | |
And that is it! You are done!
To test if your port has been properly forwarded, you can use our Port Checker tool.
Didn't find the screenshot you were looking for? Check our our giant collection of router screenshots.
