Port Forwarding the Airlink+ ASOHO4P Router for Jumi Controller

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Airlink+ > ASOHO4P > Jumi Controller

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Airlink+ ASOHO4P router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:

192.168.1. <-- Don't Skip This Step!

Login to the Airlink+ ASOHO4P Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Airlink+ ASOHO4P Router IP Address

It's ok if you don't know your Airlink+ ASOHO4P router's internal IP address. You can find it by doing one of the following:

Login To The Airlink+ ASOHO4P Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Airlink+ ASOHO4P Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Airlink+ ASOHO4P router. By default the IP address should be set to

How to Port Forward Jumi Controller on the Airlink+ ASOHO4P

Having trouble forwarding ports on the Airlink+ ASOHO4P?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.

Airlink+ ASOHO4P Router Port Forwarding Screenshots

Now that you are logged in to your Airlink+ ASOHO4P router you should see the following:

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Airlink+ ASOHO4P Router Username is: blank

The Default Airlink+ ASOHO4P Router Password is: blank

Click the Ok button to log in to your Airlink+ ASOHO4P router.

Default Usernames and Passwords for other Airlink+ Routers

Please visit our Default Airlink+ Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Airlink+ ASOHO4P router username and password, use our How to Reset a Router Password guide to set your Airlink+ ASOHO4P router back to its factory settings.

Airlink+ ASOHO4P Screenshot 1

Click the Advanced Setup link near the center of the page.

Airlink+ ASOHO4P Screenshot 3

Click the NAT link near the left of the page.

Airlink+ ASOHO4P Screenshot 4

You should now see a new menu. In this new menu, click Virtual Server.

Airlink+ ASOHO4P Screenshot 5

Forward Ports 5720 on the Airlink+ ASOHO4P

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Jumi Controller requires you to forward the following ports: 5720. Go ahead and enter the settings shown above into the Virtual Server menu.

  Mapping Ports Server IP Enabled
1. 192.168.1.

When you're finished, click Apply near the bottom of the screen to save your changes.

And that's it! You're done!

Test if Your Ports are Open

Now that you have forwarded ports for Jumi Controller on the Airlink+ ASOHO4P you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Airlink+ ASOHO4P Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Router Screenshots. We have the Internets largest collection of Router Screenshots.