Port Forwarding ABC on the Airlink+ Airlink101-AR504

What is Port Forwarding?

View all Router Screenshots.

Before we can forward ports for ABC, we need to figure out what ports ABC is using. Here is a brief walkthrough on how to do that. Go ahead and open up ABC.

Click File in the menu at the top of the program. Then click Preferences in the list that drops down.

In the menu on the left hand side of your screen, click the Network link. On this page you should see a Port box. You can change the port number that ABC is using if you like. The number that is in that Port box is the port that you will have to forward.

Please enter the number that was in that box below.

To setup port forwarding on this router your computer needs to have a static ip address.
Try our free PF Setup Static IP Address Program which will setup a static ip address for you.

Or you can take alook at our Static IP Address guide to setup a static ip address. When you are finished setting up a static ip address, please come back to this page and enter the ip address you setup in the Static IP Address box below.

Do not skip this step!

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser. If you do not know your routers internal IP address please read our How To Find Your Routers IP Address guide.

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your router. By default the IP address should be set to 192.168.1.1.

You should see a box prompting you for your username and password. Enter your username and password now. By default the username is blank, and the password is admin. Click the Ok button to log in to your router.

Please visit our Default Router Passwords page if the username and password shown above did not work for you.

Click the Forwarding Rules link near the left of the page.

You should now see a new menu. In this new menu, click Virtual Server.

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. ABC requires you to forward the following ports: 100000. Go ahead and enter the settings shown above into the Virtual Server menu.

When you're finished, click Save near the bottom of the screen to save your changes.

And that's it! You're done!

To test if your port has been properly forwarded, you can use our Port Checker tool.

Didn't find the screenshot you were looking for? Check our our giant collection of router screenshots.