Free Help Setting up Your Router or Firewall Set up your router from home
Home Guides Reviews Store Support Forum Requests
see list of routers and firewalls below

Port Forwarding for the Airlink+ Airlink101 AR504


What is Port Forwarding?
What is Port Triggering?




 

To setup port forwarding on this router your computer needs to have a static ip address. Take a look at our Static IP Address guide to setup a static ip address. When you are finished setting up a static ip address, please come back to this page and enter the ip address you setup in the Static IP Address box below.

Do not skip this step!

Please enter the static ip you want to forward to:

192.168.1.




Open a web browser like internet explorer or Netscape. Enter the ip address of your router in the address bar of your browser. In the picture above the address bar has http://www.google.com in it. Just replace all of that with the ip address of your router. By default the ip address should be set to 192.168.1.1.




You should see a box prompting you for your username and password. Enter your username and password now. By default the username is blank, and the password is admin. Click the Ok button to log in to your router.




Click the Forwarding Rules link near the left side of the page.

You should now see a new menu. In this new menu, click Virtual Server.




ID Service Ports Server IP Enable Use Rule#
1 - 192.168.1.

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Brothers in Arms-Earned in Blood requires you to forward the 40000-43000,44000,45000-45001 ports. Go ahead and enter the settings shown above into the Virtual Server menu.

ID Service Ports Server IP Enable Use Rule#
2 - 192.168.1.

You should see another page of settings that need to be entered into one of the blank lines on your routers Virtual Server page. Go ahead and enter those settings now.

ID Service Ports Server IP Enable Use Rule#
3 - 192.168.1.

You should see another page of settings that need to be entered into one of the blank lines on your routers Virtual Server page. Go ahead and enter those settings now.

When you're finished, click Save near the bottom of the screen to save your changes.

And that's it! You're done!