If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.
You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.[an error occurred while processing this directive]
To setup port forwarding on the Airlink 101 AR420W router your device needs to have a static IP address. You should complete one of the following steps first:
Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Airlink 101 AR420W router's internal IP address. You can find it by doing one of the following:
Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Airlink 101 AR420W router. By default the IP address should be set to 192.168.1.1.
We do not currently know the default username and password for your router. If you know them, please use our Comments page to let us know what they are. Thanks!Please visit our Default Router Passwords page if the username and password shown above do not work for you.
If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.
Before we can forward ports for WarezP2P, we need to figure out what port WarezP2P is using. Here is a brief walkthrough on how to do that. Go ahead and open up WarezP2P.
Click Tools in the menu at the top of your screen. In the list that drops down click Options.
In the menu at the left hand side of your screen double click the Advanced option. Clicking Advanced, should drop down a couple more options. In this new list of options click the Firewall Config option. Put a dot into the Manual Port Forward radio button. The port you need to forward is in the box to the right of the Manual Port Forward text. You can change this port if you want to. Just keep in mind that whatever port is in the Manual Port Forward box, should also be in the Listen On Port box. Then click the Apply button at the bottom of the page.
Please enter the number that was in the Manual Port Forward box into the box below.
Now that you are logged in to your Airlink 101 AR420W router you should see the following:
Click the Applications & Gaming button near the top of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. WarezP2P requires you to forward the ports you entered above. Go ahead and enter the settings shown above into the Port Range Forwarding menu.
|Application Name||Start ~ End Port||Protocol||To IP Address||Enabled|
When you're finished, click Apply near the bottom of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for WarezP2P on the Airlink 101 AR420W you should test to see if your ports are forwarded correctly.