Port Forwarding the Alice IAD-5130 Router for GeoVision Vital Sign Monitor


What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Alice > IAD-5130 > GeoVision Vital Sign Monitor

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Alice IAD-5130 router your computer needs to have a static IP address. You should complete one of the following steps first:


Now that you have setup a Static IP Address on your computer, please enter the IP address that you assigned to your computer here:

Don't Skip This Step!

Login to the Alice IAD-5130 Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Alice IAD-5130 Router IP Address

It's ok if you don't know your Alice IAD-5130 router's internal IP address. You can find it by doing one of the following:

Login To The Alice IAD-5130 Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Alice IAD-5130 Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Alice IAD-5130 router. By default the IP address should be set to 192.168.1.1.

Alice IAD-5130 Screenshot 1

We do not currently know the default username and password for your router. If you know them, please use our Comments page to let us know what they are. Thanks!

Please visit our Default Router Passwords page if the username and password shown above do not work for you.

How to Port Forward GeoVision Vital Sign Monitor on the Alice IAD-5130


Having trouble forwarding ports on the Alice IAD-5130?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Alice IAD-5130 router to save you time and hassle.

Alice IAD-5130 Router Port Forwarding Screenshots

Now that you are logged in to your Alice IAD-5130 router you should see the following:

Alice IAD-5130 Screenshot 2

Click the Heimnetz button near the left of the page.

You should now see a new menu. In this new menu, click Port Forwarding.

Alice IAD-5130 Screenshot 3

Click the Neu button near the center of the page.

Alice IAD-5130 Screenshot 4

Forward Ports 5610 on the Alice IAD-5130

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. GeoVision Vital Sign Monitor requires you to forward the 5610 ports. Go ahead and enter the settings shown above into the Port Forwarding erstellen menu and then click Speichern.

Dienst
Bezeichnung
an IP-Adresse
Protokoll
von Port   bis Port
an Port

And that is it! You are done!


Test if Your Ports are Open

Now that you have forwarded ports for GeoVision Vital Sign Monitor on the Alice IAD-5130 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Alice IAD-5130 Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Router Screenshots. We have the Internets largest collection of Router Screenshots.