Port Forwarding DiabloII on the Allied Data HLF-1616-2PEU76-01

What is Port Forwarding?

View all Router Screenshots.

To setup port forwarding on this router your computer needs to have a static ip address.
Try our free PF Setup Static IP Address Program which will setup a static ip address for your computer.

Or you can take a look at our Static IP Address guide to setup a static ip address. When you are finished setting up a static ip address, please come back to this page and enter the ip address you setup in the Static IP Address box below.

Do not skip this step!

HLF-1616-2PEU76-01

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser. If you do not know your routers internal IP address please read our How To Find Your Routers IP Address guide.

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your router. By default the IP address should be set to 172.19.3.1.

HLF-1616-2PEU76-01

You should see a box prompting you for your username and password. Enter your username and password now. By default both the username and password are admin. Click the Ok button to log in to your router.

Please visit our Default Router Passwords page if the username and password shown above do not work for you.

HLF-1616-2PEU76-01

Click the Configuration link near the left of the page.

You should now see a new menu. In this new menu, click Security.

HLF-1616-2PEU76-01

Click the Advanced NAT Configuration link near the bottom of the page.

HLF-1616-2PEU76-01

Click the Add Reserved Mapping link near the bottom of the page.

HLF-1616-2PEU76-01



Entry #1

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. DiabloII requires you to forward the 4000,6112-6119 ports. Go ahead and enter the settings shown above into the Add Reserved Mapping menu and then click Add Reserved Mapping.

IP Addresses Transport External Port
Range
Internal Port
Range
Global Internal Type Start End Start End




Entry #2

You should see another page of settings that need to be entered into one of the blank lines on your routers Add Reserved Mapping page. Go ahead and enter those settings and then click Add Reserved Mapping.

IP Addresses Transport External Port
Range
Internal Port
Range
Global Internal Type Start End Start End




Entry #3

You should see another page of settings that need to be entered into one of the blank lines on your routers Add Reserved Mapping page. Go ahead and enter those settings and then click Add Reserved Mapping.

IP Addresses Transport External Port
Range
Internal Port
Range
Global Internal Type Start End Start End

And that is it! You are done!


To test if your port has been properly forwarded, you can use our Port Checker tool.

Didn't find the screenshot you were looking for? Check our our giant collection of router screenshots.