Port Forwarding Easy File Sharing Web Server on the Allied Telesyn AR240E
Before we can forward ports for Easy File Sharing Web Server, we need to figure out what ports Easy File Sharing Web Server is using. Here is a brief walkthrough on how to do that. Go ahead and open up Easy File Sharing Web Server.
On the main page of Easy File Sharing Web Server, you will see a bunch of options. There should be a Port box right at
the top of the Easy File Sharing Web Server page. This box contains the port that needs to be forwarded in your router for Easy File Sharing Web Server
to work. You can change this port to whatever you like. If you change the port to something other than 80, people connecting to Easy File Sharing Web Server
will have to specify that port number when connecting. Let's say your routers external ip address is 205.181.0.9, and you specified port 500 in
Easy File Sharing Web Server. Someone connecting to Easy File Sharing Web Server would type http://205.181.0.9:500 into their web browser. Please
enter the port you chose for Easy File Sharing Web Server below.
Easy File Sharing Web Server's server port
To setup port forwarding on this router your computer needs to have a static ip address.
Try our free PF Setup Static IP Address Program which will setup a static ip address for your computer.
Or you can take a look at our Static IP Address guide to setup a static ip address.
When you are finished setting up a static ip address, please come back to this page and enter
the ip address you setup in the Static IP Address box below.
Do not skip this step!
Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.
If you do not know your routers internal IP address please read our How To Find Your Routers IP Address guide.
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your router.
By default the IP address should be set to 192.168.1.1:8080.
You should see a box prompting you for your username and password. Enter your username and password now.
By default the username is manager, and the password is friend. Click the Ok button to log in to your router.
Please visit our Default Router Passwords page if the username and password shown above did not work for you.
Click the Security link near the left of the page.
Click the NAT link.
If NAT is not enabled, you do not have to do port forwarding. Your router is setup as a bridge. You get your IP addresses directly from your ISP.
If the software you are trying to run does not work, your ISP may be blocking those ports. You should make sure those ports are allowed through
any firewall you may have on your computer.
If NAT is enabled, you should see a Add Reserved Mapping button on this page. Go ahead and click that button now.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Easy File Sharing Web Server requires you to forward the ports you entered above. Go ahead and enter the settings shown above into the Reserved Mapping Configuration menu and then click Apply.
| Add Reverse Address Mapping on Interface PPPoE | |||
| Global IP Address | Internal IP Address | Protocol | Port Number |
When you're finished, click Save Configuration near the left of the screen to save your changes.
And that's it! You're done!
To test if your port has been properly forwarded, you can use our Port Checker tool.
Didn't find the screenshot you were looking for? Check our our giant collection of router screenshots.
