Port Forwarding the Ambit U10C022 Router for SightSpeed

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Ambit U10C022 Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Ambit > U10C022 > SightSpeed

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Ambit U10C022 router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:

192.168.0. <-- Don't Skip This Step!

Login to the Ambit U10C022 Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Ambit U10C022 Router IP Address

It's ok if you don't know your Ambit U10C022 router's internal IP address. You can find it by doing one of the following:

Login To The Ambit U10C022 Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Ambit U10C022 Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Ambit U10C022 router. By default the IP address should be set to

Ambit U10C022 Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Ambit U10C022 Router Username is: admin

The Default Ambit U10C022 Router Password is: cableroot

Click the Ok button to log in to your Ambit U10C022 router.

Default Usernames and Passwords for other Ambit Routers

Please visit our Default Ambit Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Ambit U10C022 router username and password, use our How to Reset a Router Password guide to set your Ambit U10C022 router back to its factory settings.

How to Port Forward SightSpeed on the Ambit U10C022

Having trouble forwarding ports on the Ambit U10C022?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.

Ambit U10C022 Router Port Forwarding Screenshots

Now that you are logged in to your Ambit U10C022 router you should see the following:

Ambit U10C022 Screenshot 2

Click the Gateway link near the top of the page.

You should now see a new menu. In this new menu, click Forwarding.

Ambit U10C022 Screenshot 3

Forward Ports 9000 on the Ambit U10C022

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. SightSpeed requires you to forward the following ports: 9000. Go ahead and enter the settings shown above into the Forwarding menu.

Local IP Internal
Public Interface IP Ext Start
Ext End
Protocol Enabled

When you're finished, click Apply near the bottom of the screen to save your changes.

And that's it! You're done!

Test if Your Ports are Open

Now that you have forwarded ports for SightSpeed on the Ambit U10C022 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Ambit U10C022 Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Ambit U10C022 Router Screenshots. We have the Internets largest collection of Router Screenshots.