Port Forwarding the Ansel 9010 Router for HAI Home Automation

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Ansel > 9010 > HAI Home Automation

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Ansel 9010 router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:

192.168.1. <-- Don't Skip This Step!

Login to the Ansel 9010 Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Ansel 9010 Router IP Address

It's ok if you don't know your Ansel 9010 router's internal IP address. You can find it by doing one of the following:

Login To The Ansel 9010 Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Ansel 9010 Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Ansel 9010 router. By default the IP address should be set to

Ansel 9010 Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Ansel 9010 Router Username is: admin

The Default Ansel 9010 Router Password is: admin

Click the Ok button to log in to your Ansel 9010 router.

Default Usernames and Passwords for other Ansel Routers

Please visit our Default Ansel Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Ansel 9010 router username and password, use our How to Reset a Router Password guide to set your Ansel 9010 router back to its factory settings.

How to Port Forward HAI Home Automation on the Ansel 9010

Having trouble forwarding ports on the Ansel 9010?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.

Ansel 9010 Router Port Forwarding Screenshots

Now that you are logged in to your Ansel 9010 router you should see the following:

Ansel 9010 Screenshot 2

Click the Virtual Server link near the left of the page.

Ansel 9010 Screenshot 3

Forward Ports 4369 on the Ansel 9010

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. HAI Home Automation requires you to forward the following ports: 4369. Go ahead and enter the settings shown above into the Virtual Server Settings menu.

Select Redirect IP Address Port Range Protocol
. .. ~

When you're finished, click Apply near the bottom of the screen to save your changes.

And that's it! You're done!

Test if Your Ports are Open

Now that you have forwarded ports for HAI Home Automation on the Ansel 9010 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Ansel 9010 Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Router Screenshots. We have the Internets largest collection of Router Screenshots.