Port Forwarding the Aolynk DR814Qv2 Router for Flatout 2

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Aolynk Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Aolynk > DR814Qv2 > Flatout 2

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Aolynk DR814Qv2 router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:

Don't Skip This Step!

Login to the Aolynk DR814Qv2 Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Aolynk DR814Qv2 Router IP Address

It's ok if you don't know your Aolynk DR814Qv2 router's internal IP address. You can find it by doing one of the following:

Login To The Aolynk DR814Qv2 Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Aolynk DR814Qv2 Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Aolynk DR814Qv2 router. By default the IP address should be set to

Aolynk DR814Qv2 Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Aolynk DR814Qv2 Router Username is: admin

The Default Aolynk DR814Qv2 Router Password is: admin

Click the Ok button to log in to your Aolynk DR814Qv2 router.

Default Usernames and Passwords for other Aolynk Routers

Please visit our Default Aolynk Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Aolynk DR814Qv2 router username and password, use our How to Reset a Router Password guide to set your Aolynk DR814Qv2 router back to its factory settings.

How to Port Forward Flatout 2 on the Aolynk DR814Qv2

Having trouble forwarding ports on the Aolynk DR814Qv2?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.

Aolynk DR814Qv2 Router Port Forwarding Screenshots

Now that you are logged in to your Aolynk DR814Qv2 router you should see the following:

Aolynk DR814Qv2 Screenshot 2

Click the Security link near the left of the page.

Aolynk DR814Qv2 Screenshot 3

Forward Ports 23756 on the Aolynk DR814Qv2

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Flatout 2 requires you to forward the 23756 ports. Go ahead and enter the settings shown above into the Virtual Servers menu and then click Add.

Internal Address Protocol External Port Range Internal Port Range Action
- -

When you're finished, click Save Config near the left of the screen to save your changes.

And that's it! You're done!

Test if Your Ports are Open

Now that you have forwarded ports for Flatout 2 on the Aolynk DR814Qv2 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Aolynk DR814Qv2 Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Aolynk Router Screenshots. We have the Internets largest collection of Router Screenshots.