Port Forwarding Hamachi on the Aolynk DR814Qv2
Before we can forward ports for Hamachi, we need to set the port Hamachi will be using. Here is a brief walkthrough on how to do that. Go ahead and open up Hamachi.
Click gear button at the bottom right hand side of your screen. Clicking the gear button will bring up a list of options. In this list of options click Preferences.
In the menu on the left hand section of the new window that opened up click the System option. In the right hand section of that window, there should be a Fix UDP Port checkbox. Go ahead and check that box now. To the right of the magic option there is a box with a port number in it. You can change that port number to whatever port you want. Please enter the port you chose into the box below.
Hamachi's Magic Port
To setup port forwarding on this router your computer needs to have a static ip address.
Try our free PF Setup Static IP Address Program which will setup a static ip address for your computer.
Or you can take a look at our Static IP Address guide to setup a static ip address.
When you are finished setting up a static ip address, please come back to this page and enter
the ip address you setup in the Static IP Address box below.
Do not skip this step!
Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.
If you do not know your routers internal IP address please read our How To Find Your Routers IP Address guide.
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your router.
By default the IP address should be set to 192.168.1.1.
You should see a box prompting you for your username and password. Enter your username and password now.
By default both the username and password are admin. Click the Ok button to log in to your router.
Please visit our Default Router Passwords page if the username and password shown above do not work for you.
Click the Security link near the left of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Hamachi requires you to forward the ports you entered above. Go ahead and enter the settings shown above into the Virtual Servers menu and then click Add.
| Internal Address | Protocol | External Port Range | Internal Port Range | Action |
| - | - |
When you're finished, click Save Config near the left of the screen to save your changes.
And that's it! You're done!
To test if your port has been properly forwarded, you can use our Port Checker tool.
Didn't find the screenshot you were looking for? Check our our giant collection of router screenshots.
