Free Port Forwarding Guides & PFConfig: Forward Your Ports Automatically
Port Forwarding Active Webcam on the Apple AirPortExtreme
Before we can forward ports for ActiveWebCam, we need to figure out what ports ActiveWebCam++ is using. Here is a brief walkthrough on how to do that. Go ahead and open up ActiveWebCam and get into the camera you want to modifies settings.
At the top of the camera's properties page click the Broadcasting link.
There are two things on this page that require forwarding a port. If you have Remote Access enabled, you need to forward the port in the remote accesses section's Port box. You can change the port that is in that box if you like. Please enter the port for Remote Access into the box below. If you are not using Remote Access just leave this box blank.
ActiveWebCam's port for remote access
The HTTP Server is the second thing in Active WebCam that requires port forwarding. The Port box in the Http Server section contains the port number that must be forwarded for the HTTP Server. You can change that port number if you like. Please enter the port you are using for the HTTP Server into the box below. If you are not using the HTTP Server just leave this box blank.
ActiveWebCam's port for the HTTP Server
To setup port forwarding on this router your computer needs to have a static ip address.
Try our free PF Setup Static IP Address Program which will setup a static ip address for you.
Or you can take alook at our Static IP Address guide to setup a static ip address.
When you are finished setting up a static ip address, please come back to this page and enter
the ip address you setup in the Static IP Address box below.
Do not skip this step!
Open up the finder on your Mac.
Click the Applications button near the left of the page.
Click the Utilities button near the right of the page.
Click the AirPort Admin Utility button near the right of the page.
Select Apple Base Station from the Select Base Station list.
Click the Port Mapping button near the top of the page.
Click the Add button near the right of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Active Webcam requires you to forward the ports you entered above. Go ahead and enter the settings shown above into the Port Mapping Add menu and then click Ok.
| Public Port: | |
| Private Address: | 10.0.1. |
| Private Port: |
You should see another page of settings that need to be entered into one of the blank lines on your routers Port Mapping Add page. Go ahead and enter those settings and then click Ok.
| Public Port: | |
| Private Address: | 10.0.1. |
| Private Port: |
When you're finished, click Update near the bottom of the screen to save your changes.
And that's it! You're done!
To test if your port has been properly forwarded, you can use our Port Checker tool.
Didn't find the screenshot you were looking for? Check our our giant collection of router screenshots.