Port Forwarding QSee QSTD5304 on the Apple AirPortExtreme
Configuring the DVR to pick up an IP address
Power Cycle the DVR
Identifying the IP address
Assign a Static IP
|
To setup port forwarding on this router your computer needs to have a static ip address.
Try our free PF Setup Static IP Address Program which will setup a static ip address for you.
Or you can take alook at our Static IP Address guide to setup a static ip address.
When you are finished setting up a static ip address, please come back to this page and enter
the ip address you setup in the Static IP Address box below.
Do not skip this step!
Open up the finder on your Mac.
Click the Applications button near the left of the page.
Click the Utilities button near the right of the page.
Click the AirPort Admin Utility button near the right of the page.
Select Apple Base Station from the Select Base Station list.
Click the Port Mapping button near the top of the page.
Click the Add button near the right of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. QSee QSTD5304 requires you to forward the 80,2000 ports. Go ahead and enter the settings shown above into the Port Mapping Add menu and then click Ok.
| Public Port: | |
| Private Address: | 10.0.1. |
| Private Port: |
You should see another page of settings that need to be entered into one of the blank lines on your routers Port Mapping Add page. Go ahead and enter those settings and then click Ok.
| Public Port: | |
| Private Address: | 10.0.1. |
| Private Port: |
When you're finished, click Update near the bottom of the screen to save your changes.
And that's it! You're done!
To test if your port has been properly forwarded, you can use our Port Checker tool.
Didn't find the screenshot you were looking for? Check our our giant collection of router screenshots.
