Port Forwarding QSee QSU2DVR04 on the Apple AirPortExtreme
Before we can forward ports to your DVR, we need to change some settings in your DVR.
Open the SuperDvr program. Click the lock on the right side of the window to log in. By default the username is system and the password is blank. That might mean that you enter nothing for the password, or you might actually have to type blank.
Click the wrench tool on the right hand side of the screen to get in to the configuration menu.
The red box in the screenshot above circles the ports that must be forwarded to your computer's ip address.
To setup port forwarding on this router your computer needs to have a static ip address.
Try our free PF Setup Static IP Address Program which will setup a static ip address for you.
Or you can take alook at our Static IP Address guide to setup a static ip address.
When you are finished setting up a static ip address, please come back to this page and enter
the ip address you setup in the Static IP Address box below.
Do not skip this step!
Open up the finder on your Mac.
Click the Applications button near the left of the page.
Click the Utilities button near the right of the page.
Click the AirPort Admin Utility button near the right of the page.
Select Apple Base Station from the Select Base Station list.
Click the Port Mapping button near the top of the page.
Click the Add button near the right of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. QSee QSU2DVR04 requires you to forward the 80,1159-1161 ports. Go ahead and enter the settings shown above into the Port Mapping Add menu and then click Ok.
| Public Port: | |
| Private Address: | 10.0.1. |
| Private Port: |
You should see another page of settings that need to be entered into one of the blank lines on your routers Port Mapping Add page. Go ahead and enter those settings and then click Ok.
| Public Port: | |
| Private Address: | 10.0.1. |
| Private Port: |
You should see another page of settings that need to be entered into one of the blank lines on your routers Port Mapping Add page. Go ahead and enter those settings and then click Ok.
| Public Port: | |
| Private Address: | 10.0.1. |
| Private Port: |
You should see another page of settings that need to be entered into one of the blank lines on your routers Port Mapping Add page. Go ahead and enter those settings and then click Ok.
| Public Port: | |
| Private Address: | 10.0.1. |
| Private Port: |
When you're finished, click Update near the bottom of the screen to save your changes.
And that's it! You're done!
To test if your port has been properly forwarded, you can use our Port Checker tool.
Didn't find the screenshot you were looking for? Check our our giant collection of router screenshots.
