Port Forwarding WarezP2P on the Apple AirPortExtreme
Before we can forward ports for WarezP2P, we need to figure out what port WarezP2P is using. Here is a brief walkthrough on how to do that. Go ahead and open up WarezP2P.
Click Tools in the menu at the top of your screen. In the list that drops down click Options.
In the menu at the left hand side of your screen double click the Advanced option. Clicking Advanced, should drop down a couple more options. In this new list of options click the Firewall Config option. Put a dot into the Manual Port Forward radio button. The port you need to forward is in the box to the right of the Manual Port Forward text. You can change this port if you want to. Just keep in mind that whatever port is in the Manual Port Forward box, should also be in the Listen On Port box. Then click the Apply button at the bottom of the page.
Please enter the number that was in the Manual Port Forward box into the box below.
WarezP2P's Port for incoming connections
To setup port forwarding on this router your computer needs to have a static ip address.
Try our free PF Setup Static IP Address Program which will setup a static ip address for you.
Or you can take alook at our Static IP Address guide to setup a static ip address.
When you are finished setting up a static ip address, please come back to this page and enter
the ip address you setup in the Static IP Address box below.
Do not skip this step!
Open up the finder on your Mac.
Click the Applications button near the left of the page.
Click the Utilities button near the right of the page.
Click the AirPort Admin Utility button near the right of the page.
Select Apple Base Station from the Select Base Station list.
Click the Port Mapping button near the top of the page.
Click the Add button near the right of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. WarezP2P requires you to forward the ports you entered above. Go ahead and enter the settings shown above into the Port Mapping Add menu and then click Ok.
| Public Port: | |
| Private Address: | 10.0.1. |
| Private Port: |
When you're finished, click Update near the bottom of the screen to save your changes.
And that's it! You're done!
To test if your port has been properly forwarded, you can use our Port Checker tool.
Didn't find the screenshot you were looking for? Check our our giant collection of router screenshots.
