Port Forwarding BitSpirit on the Arris WTM552

What is Port Forwarding?

View all Router Screenshots.

Before we can forward ports for BitSpirit, we need to figure out what ports BitSpirit is using. Here is a brief walkthrough on how to do that. Go ahead and open up BitSpirit.

Click Options in the menu at the top of your screen. In the list that drops down click Preferences.

Click the Network Options tab at the top of that page. You should now see the menu shown in the screenshot above. The number in the Default Port for TCP Listening box contains the port you need to forward. You can change this port if you want to. If you do change it, it is a good idea to pick a port between 10000 and 60000. Most ISPs do not block those higher numbered ports.

To setup port forwarding on this router your computer needs to have a static ip address.
Try our free PF Setup Static IP Address Program which will setup a static ip address for you.

Or you can take alook at our Static IP Address guide to setup a static ip address. When you are finished setting up a static ip address, please come back to this page and enter the ip address you setup in the Static IP Address box below.

Do not skip this step!

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser. If you do not know your routers internal IP address please read our How To Find Your Routers IP Address guide.

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your router. By default the IP address should be set to 192.168.2.1.

You should see a box prompting you for your password. Enter your password now. By default your password is blank. Click the Submit button to log in to your router.

Please visit our Default Router Passwords page if the username and password shown above do not work for you.

Click the Firewall button near the left of the page.

You should now see a new menu. In this new menu, click Virtual Servers.

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. BitSpirit requires you to forward the following ports: 100000. Go ahead and enter the settings shown above into the Virtual Servers menu.

When you're finished, click Save near the top of the screen to save your changes.

And that's it! You're done!

To test if your port has been properly forwarded, you can use our Port Checker tool.

Didn't find the screenshot you were looking for? Check our our giant collection of router screenshots.