Port Forwarding Network Thermostat UP32-WIFI on the Artnet TW263R4
Before we can forward ports, we need to do a little configuration. Here is a brief walkthrough on how to do that. Go ahead and open up your thermostat's Configuration page.
On this page you need to change the HTTP Port to 81, and ASCII Port to 10001. For every additional thermostat you'll want to increase each number by one. So thermostat #1 would be ports 81 and 10001, thermostat #2 would be ports 82 and 10002, thermostat #3 would be ports 83 and 10003, ect.
Once you've finished configuring things, go ahead and click the Save & Reboot button to save things. After you have finished saving and rebooting, you will need to log in to your thermostat again.
To setup port forwarding on this router your computer needs to have a static ip address.
Try our free PF Setup Static IP Address Program which will setup a static ip address for your computer.
Or you can take a look at our Static IP Address guide to setup a static ip address.
When you are finished setting up a static ip address, please come back to this page and enter
the ip address you setup in the Static IP Address box below.
Do not skip this step!
Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.
If you do not know your routers internal IP address please read our How To Find Your Routers IP Address guide.
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your router.
By default the IP address should be set to 192.168.1.1.
You should see a box prompting you for your username and password. Enter your username and password now.
By default both the username and password are admin. Click the Ok button to log in to your router.
Please visit our Default Router Passwords page if the username and password shown above do not work for you.
Click the Advanced Setup link near the top of the page.
Click the NAT link near the top of the page.
Click the Virtual Server link near the bottom of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Network Thermostat UP32-WIFI requires you to forward the 81,10001 ports. Go ahead and enter the settings shown above into the Virtual Server menu and then click Save.
| Rule Index : | |
| Start Port Number : | |
| End Port Number : | |
| Local IP Address : |
You should see another page of settings that need to be entered into one of the blank lines on your routers Virtual Server page. Go ahead and enter those settings and then click Save.
| Rule Index : | |
| Start Port Number : | |
| End Port Number : | |
| Local IP Address : |
And that is it! You are done!
To test if your port has been properly forwarded, you can use our Port Checker tool.
Didn't find the screenshot you were looking for? Check our our giant collection of router screenshots.
