Port Forwarding QSee QSDR16RTC-500 on the Asus AAM6310

What is Port Forwarding?

View all Router Screenshots.

Home > Routers > Asus > AAM6310 > QSee QSDR16RTC-500

Configuring the DVR to pick up an IP address

  • Press Menu
  • Select Network
  • Make sure Type is set to DHCP

  • Select Apply
  • Select Exit
The DVR will reboot & pick up an ip address from the router.


Identifying the IP address

  • Press Menu
  • Select Network
  • Write down the ip address, subnet mask & gateway.


Assign a Static IP

  • Change Type to Static
  • Input the same ip address, subnet mask & gateway - (you wrote down earlier).

  • Select Apply
  • Select Exit
Now you have completed the ip configuration for the dvr.
Move on to the port forwarding section . in you router.

To setup port forwarding on this router your computer needs to have a static ip address.
Try our free PF Setup Static IP Address Program which will setup a static ip address for you.

Or you can take alook at our Static IP Address guide to setup a static ip address. When you are finished setting up a static ip address, please come back to this page and enter the ip address you setup in the Static IP Address box below.

Do not skip this step!

10.0.0.
AAM6310

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser. If you do not know your routers internal IP address please read our How To Find Your Routers IP Address guide.

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your router. By default the IP address should be set to 10.0.0.138.

AAM6310

We do not currently know the default username and password for your router. If you know them, please use our Comments page to let us know what they are. Thanks!

You can find common passwords that might work for your router in our Default Router Passwords page.

AAM6310

Click the Services button near the top of the page.

AAM6310

Select NAT Rule Entry from the NAT Options drop down box.

AAM6310

Click the Add button near the bottom of the page.

AAM6310


Entry #1

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. QSee QSDR16RTC-500 requires you to forward the 80,9000 ports. Go ahead and enter the settings shown above into the NAT Rule - Add menu and then click Submit.

Nat Rule Information
Rule Flavor:     
Rule ID:     
IF Name:     
Protocol:     
Local Address From:     
Local Address To:     
Global Address From:     
Global Address To:     
Destination Port From:        
Destination Port To:        
Local Port:        



Entry #2

You should see another page of settings that need to be entered into one of the blank lines on your routers NAT Rule - Add page. Go ahead and enter those settings and then click Submit.

Nat Rule Information
Rule Flavor:     
Rule ID:     
IF Name:     
Protocol:     
Local Address From:     
Local Address To:     
Global Address From:     
Global Address To:     
Destination Port From:        
Destination Port To:        
Local Port:        

Click the Admin button near the top of the page.

AAM6310

Click the Commit & Reboot link near the top of the page.

AAM6310

Click the Commit button near the bottom of the page.

Click the Reboot button near the bottom of the page.

And that is it! You are done!


To test if your port has been properly forwarded, you can use our Port Checker tool.

Didn't find the screenshot you were looking for? Check our our giant collection of router screenshots.