If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.
You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.
To setup port forwarding on the Asus AM602 router your device needs to have a static IP address. You should complete one of the following steps first:
Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Asus AM602 router's internal IP address. You can find it by doing one of the following:
Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Asus AM602 router. By default the IP address should be set to 192.168.1.1.
You should see a box prompting you for your username and password. Enter your username and password now.
Click the Ok button to log in to your Asus AM602 router.
Please visit our Default Asus Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Asus AM602 router username and password, use our How to Reset a Router Password guide to set your Asus AM602 router back to its factory settings.
If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Asus AM602 router to save you time and hassle.
Now that you are logged in to your Asus AM602 router you should see the following:
Click the Advanced Setup link near the left of the page.
You should now see a new menu. In this new menu, click NAT.
Click the Add button near the center of the page.
Put a dot into the Custom Server radio button.
Enter the name of the program into the Custom Server box. It doesn't really matter what you put into this box, but something that will remind you why these ports are being forwarded would be a good idea.
Enter the ip address to forward these ports to into the Server IP Address box. If you are forwarding ports so you can run a program on your device, you should enter your device's ip address into that box.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. XBOX360 Dead or Alive Code Cronus requires you to forward the following ports: 3074. Go ahead and enter the settings shown above into the NAT -- Virtual Servers menu.
|External Port Start||External Port End||Protocol||Internal Port Start||Internal Port End|
When you're finished, click Save/Apply near the bottom of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for XBOX360 Dead or Alive Code Cronus on the Asus AM602 you should test to see if your ports are forwarded correctly.