Port Forwarding eMule on the Asus WL600g

Before we can forward ports for eMule, we need to figure out what ports eMule is using. Here is a brief walkthrough on how to do that. Go ahead and open up eMule.

Click the Options button in the menu at the top of your screen.

Click the Connection option on the left hand side of your screen. You should see a TCP box and an UDP box. Enter a random port into each of these boxes. It doesn't matter what ports you choose, but a port numbers between 10000 and 60000 would be a good idea. A higher numbered port is generally the best to use, because most ISP's do not block the higher numbered ports. Please enter the port you chose for the TCP box into the box below.

Please enter the port you chose for the UDP box into the box below.

To setup port forwarding on this router your computer needs to have a static ip address.
Try our free PF Setup Static IP Address Program which will setup a static ip address for your computer.

Or you can take a look at our Static IP Address guide to setup a static ip address. When you are finished setting up a static ip address, please come back to this page and enter the ip address you setup in the Static IP Address box below.

Do not skip this step!

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser. If you do not know your routers internal IP address please read our How To Find Your Routers IP Address guide.

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your router. By default the IP address should be set to 192.168.1.1.

You should see a box prompting you for your username and password. Enter your username and password now. By default both the username and password are admin. Click the Ok button to log in to your router.

Please visit our Default Router Passwords page if the username and password shown above do not work for you.

Click the Advanced Setup link near the left of the page.

You should now see a new menu. In this new menu, click NAT.

Click the Add button near the center of the page.

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. eMule requires you to forward the following ports: 100000,100001. Go ahead and enter the settings shown above into the Virtual Servers Add menu.

You should see another page of settings that need to be entered into one of the blank lines on your routers Virtual Servers Add page. Go ahead and enter those settings now.

When you're finished, click Save/Apply near the bottom of the screen to save your changes.

And that's it! You're done!

To test if your port has been properly forwarded, you can use our Port Checker tool.