Port Forwarding the Axesstel AXV-D450 Router for QSee QSD9004

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Axesstel AXV-D450 Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Axesstel > AXV-D450 > QSee QSD9004

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Axesstel AXV-D450 router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:

Don't Skip This Step!

Login to the Axesstel AXV-D450 Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Axesstel AXV-D450 Router IP Address

It's ok if you don't know your Axesstel AXV-D450 router's internal IP address. You can find it by doing one of the following:

Login To The Axesstel AXV-D450 Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Axesstel AXV-D450 Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Axesstel AXV-D450 router. By default the IP address should be set to

Axesstel AXV-D450 Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Axesstel AXV-D450 Router Username is: admin

The Default Axesstel AXV-D450 Router Password is: admin

Click the Ok button to log in to your Axesstel AXV-D450 router.

Default Usernames and Passwords for other Axesstel Routers

Please visit our Default Axesstel Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Axesstel AXV-D450 router username and password, use our How to Reset a Router Password guide to set your Axesstel AXV-D450 router back to its factory settings.

How to Port Forward QSee QSD9004 on the Axesstel AXV-D450

Having trouble forwarding ports on the Axesstel AXV-D450?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.

Configuring the DVR to pick up an IP address

  • Press Menu
  • Select Network
  • Make sure Type is set to DHCP

  • Select Apply
  • Select Exit
The DVR will reboot & pick up an ip address from the router.

Identifying the IP address

  • Press Menu
  • Select Network
  • Write down the ip address, subnet mask & gateway.

Assign a Static IP

  • Change Type to Static
  • Input the same ip address, subnet mask & gateway - (you wrote down earlier).

  • Select Apply
  • Select Exit
Now you have completed the ip configuration for the dvr.
Move on to the port forwarding section . in you router.

Axesstel AXV-D450 Router Port Forwarding Screenshots

Now that you are logged in to your Axesstel AXV-D450 router you should see the following:

Axesstel AXV-D450 Screenshot 2

Click the Security button near the top of the page.

Axesstel AXV-D450 Screenshot 3

Forward Ports 80 on the Axesstel AXV-D450

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. QSee QSD9004 requires you to forward the following ports: 80,9000. Go ahead and enter the settings shown above into the Security menu.

  Protocol Port # Local PC IP

Forward Ports 9000 on the Axesstel AXV-D450

You should see another page of settings that need to be entered into one of the blank lines on your routers Security page. Go ahead and enter those settings now.

  Protocol Port # Local PC IP

When you're finished, click Apply near the bottom of the screen to save your changes.

And that's it! You're done!

Test if Your Ports are Open

Now that you have forwarded ports for QSee QSD9004 on the Axesstel AXV-D450 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Axesstel AXV-D450 Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Axesstel AXV-D450 Router Screenshots. We have the Internets largest collection of Router Screenshots.