Port Forwarding the Aztech 600-EW Router for QSee QSDR008RTC

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Aztech Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Aztech > 600-EW > QSee QSDR008RTC

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Aztech 600-EW router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:

Don't Skip This Step!

Login to the Aztech 600-EW Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Aztech 600-EW Router IP Address

It's ok if you don't know your Aztech 600-EW router's internal IP address. You can find it by doing one of the following:

Login To The Aztech 600-EW Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Aztech 600-EW Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Aztech 600-EW router. By default the IP address should be set to

Aztech 600-EW Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Aztech 600-EW Router Username is: admin

The Default Aztech 600-EW Router Password is: admin

Click the Ok button to log in to your Aztech 600-EW router.

Default Usernames and Passwords for other Aztech Routers

Please visit our Default Aztech Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Aztech 600-EW router username and password, use our How to Reset a Router Password guide to set your Aztech 600-EW router back to its factory settings.

How to Port Forward QSee QSDR008RTC on the Aztech 600-EW

Having trouble forwarding ports on the Aztech 600-EW?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.

Configuring the DVR to pick up an IP address

  • Press Menu
  • Select Network
  • Make sure Type is set to DHCP

  • Select Apply
  • Select Exit
The DVR will reboot & pick up an ip address from the router.

Identifying the IP address

  • Press Menu
  • Select Network
  • Write down the ip address, subnet mask & gateway.

Assign a Static IP

  • Change Type to Static
  • Input the same ip address, subnet mask & gateway - (you wrote down earlier).

  • Select Apply
  • Select Exit
Now you have completed the ip configuration for the dvr.
Move on to the port forwarding section . in you router.

Aztech 600-EW Router Port Forwarding Screenshots

Now that you are logged in to your Aztech 600-EW router you should see the following:

Aztech 600-EW Screenshot 2

Click the Advanced button near the top of the page.

Aztech 600-EW Screenshot 3

The menu on the left should change. In this new menu, click Port Forwarding.

Aztech 600-EW Screenshot 4

Put a dot into the User radio button.

Aztech 600-EW Screenshot 5

Click the New button near the bottom of the page.

Aztech 600-EW Screenshot 6

Forward Ports 80 on the Aztech 600-EW

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. QSee QSDR008RTC requires you to forward the 80,9000 ports. Go ahead and enter the settings shown above into the Rule Management menu and then click Apply.

Rule Name    
Port Start Port End
Port Map    

Forward Ports 9000 on the Aztech 600-EW

You should see another page of settings that need to be entered into one of the blank lines on your routers Rule Management page. Go ahead and enter those settings and then click Apply.

Rule Name    
Port Start Port End
Port Map    
Aztech 600-EW Screenshot 5

Select the applications you just created in the Available Rules list, then click the Add > button to move them to the Applied Rules box.

When you are finished, click the Apply button.

When you're finished, click Save All Settings near the left of the screen to save your changes.

And that's it! You're done!

Test if Your Ports are Open

Now that you have forwarded ports for QSee QSDR008RTC on the Aztech 600-EW you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Aztech 600-EW Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Aztech Router Screenshots. We have the Internets largest collection of Router Screenshots.