Port Forwarding the Aztech WL230USB Router for XBOX360 Quake 4

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Aztech Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Aztech > WL230USB > XBOX360 Quake 4

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Aztech WL230USB router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:

192.168.1. <-- Don't Skip This Step!

Login to the Aztech WL230USB Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Aztech WL230USB Router IP Address

It's ok if you don't know your Aztech WL230USB router's internal IP address. You can find it by doing one of the following:

Login To The Aztech WL230USB Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Aztech WL230USB Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Aztech WL230USB router. By default the IP address should be set to

Aztech WL230USB Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Aztech WL230USB Router Username is: admin

The Default Aztech WL230USB Router Password is: admin

Click the Ok button to log in to your Aztech WL230USB router.

Default Usernames and Passwords for other Aztech Routers

Please visit our Default Aztech Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Aztech WL230USB router username and password, use our How to Reset a Router Password guide to set your Aztech WL230USB router back to its factory settings.

How to Port Forward XBOX360 Quake 4 on the Aztech WL230USB

Having trouble forwarding ports on the Aztech WL230USB?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.

Aztech WL230USB Router Port Forwarding Screenshots

Now that you are logged in to your Aztech WL230USB router you should see the following:

Aztech WL230USB Screenshot 2

Click the Applications link near the top of the page.

You should now see a new menu. In this new menu, click Port Forwarding.

Aztech WL230USB Screenshot 3

Forward Ports 3074 on the Aztech WL230USB

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. XBOX360 Quake 4 requires you to forward the following ports: 3074. Go ahead and enter the settings shown above into the Port Forwarding menu.

Application Start End Protocol IP Address Enabled
to 192.168.1.

And that is it! You are done!

Test if Your Ports are Open

Now that you have forwarded ports for XBOX360 Quake 4 on the Aztech WL230USB you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Aztech WL230USB Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Aztech Router Screenshots. We have the Internets largest collection of Router Screenshots.