If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.
You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your BT BT2700HGVv2 router's internal IP address. You can find it by doing one of the following:
Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your BT BT2700HGVv2 router. By default the IP address should be set to 192.168.1.254.
You should see a box prompting you for your BT BT2700HGVv2 password. Enter the password now.
Click the Submit button to log in to your BT BT2700HGVv2 router.
Please visit our Default BT Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your BT BT2700HGVv2 router password, use our How to Reset a Router Password guide to set your BT BT2700HGVv2 router back to its factory settings.
If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.
Now that you are logged in to your BT BT2700HGVv2 router you should see the following:
Click the Settings button near the top of the page.
Click the Firewall button near the top of the page.
You should now see a new menu. In this new menu, click Allow Applications, Pinholes and DMZ Mode.
Use the Select a Computer box to choose a device to forward ports to. This box contains a list of device names that are visible on your network.
Put a dot into the Allow Individual Applications radio button.
Click the Add a New User-Defined Application link near the center of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Lorex LH320 requires you to forward the 80 ports. Go ahead and enter the settings shown above into the Firewall Application Profile Definition menu and then click Add to List.
|Application Profile Name:|
|Create Application Definition|
|Port (or Range):||From: To:|
|Map to Host Port:|
Select the applications you just created in the User-Defined list, then click the Add button to move them to the Hosted Applications box.
When you're finished, click Save near the bottom of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for Lorex LH320 on the BT BT2700HGVv2 you should test to see if your ports are forwarded correctly.