Free Port Forwarding Guides & PFConfig: Forward Your Ports Automatically
Port Forwarding ATC Ghost Recon 2 on the BT Voyager1500
Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.
If you do not know your routers internal IP address please read our How To Find Your Routers IP Address guide.
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your router.
By default the IP address should be set to 192.168.1.250.
Click the Advanced link near the left of the page.
You should see a box prompting you for your username and password. Enter your username and password now.
By default both the username and password are admin. Click the Ok button to log in to your router.
Please visit our Default Router Passwords page if the username and password shown above do not work for you.
Click the Configuration link near the left of the page.
You should now see a new menu. In this new menu, click Virtual Server.
Click the Port Forwarding link near the top of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. ATC Ghost Recon 2 requires you to forward the 30 ports. Go ahead and enter the settings shown above into the Virtual Server Configuration menu and then click Apply.
| Feature not applicable in Access Point mode | |||
| Port Forwarding | Enabled Disabled | ||
| Service | |||
| Select service from a list | |||
| Create rule manually | |||
| Service | Protocol | Wan Port | Lan Port |
| Select from devices currently connected to this access point | |||
| Enter MAC address manually | |||
| Enter IP address manually | |||
| Devices | |||
You should see another page of settings that need to be entered into one of the blank lines on your routers Virtual Server Configuration page. Go ahead and enter those settings and then click Apply.
| Feature not applicable in Access Point mode | |||
| Port Forwarding | Enabled Disabled | ||
| Service | |||
| Select service from a list | |||
| Create rule manually | |||
| Service | Protocol | Wan Port | Lan Port |
| Select from devices currently connected to this access point | |||
| Enter MAC address manually | |||
| Enter IP address manually | |||
| Devices | |||
And that is it! You are done!
To test if your port has been properly forwarded, you can use our Port Checker tool.
Didn't find the screenshot you were looking for? Check our our giant collection of router screenshots.